Signs of a Failing Commercial Water Heater
Serving Vancouver WA – Camas WA – Battle Ground WA
If you own or are responsible for the maintenance of a commercial building, then sooner or later you’ll experience a failing commercial water heater. There are many signs and symptoms to look for when determining if your commercial water heater is about to fail. These include visual and auditory clues, as well as problems with your water’s pressure or temperature. Check out these top signs of a failing water heater to be prepared to detect problems in your own commercial water system.
Of the many signs of a failing water heater, perhaps the most obvious is leaking water around the heater itself. You may see small drips coming from the fittings on the lower or upper ends of your water, where cold water is supplied to the tank or where hot water is forced out. Larger leaks will result in puddles accumulating below your tank. A leaking water heater can cause damage to surrounding appliances, and always needs immediate attention.
Speedy and Reliable Plumbing Services
Click the button below and we’ll call you back in 30 minutes or less!
Discolored water may also be an indicator of a failing water heater. If Rust and other debris is present in your hot water, and not your cold water, then you almost surely are in need of water heater repair. Rusty water from your hot water faucet means that corrosion is taking place inside the tank of your water heater, either on the tank walls, or more likely the heating element.
Other Signs of a Failing Water Heater
Beyond rusty water and puddles indicating a leaking water heater, there are several other signs to look for. Noisy water heaters that emit a popcorn-maker sound are invariably on the verge of failing. Commercial water heats are often equipped with fans and blower motors that become louder when failing, as well.
Luke-warm water is a sign of failing water heaters, too. It can indicate a burnt out heating element or other serious issues. You can also look for yellow or red staining, rusting, or other discoloration around the base of your water heater tank for further indication it is in need of repair.
If you’re commercial building is experiencing any of these signs of a damaged water heater then you should contact a professional right away. If you’re near Vancouver, Camas or Battle Ground, Washington, then call Clark County Plumbing & Drain for a top-quality inspection of your heater.
Signs Of A Failing Commercial Water Heater IN VANCOUVER WA AND CAMAS WA
Serving Clients in the Greater Vancouver WA Area: